Gymnova
O’Jump
Educ’Gym
Eurotramp
Brick
.png)
.png)
_1.png)
Ref : 8011
MANUAL INFLATOR FOR INFLATABLE MODULES, MATS AND BEAMS
The hand pump allows you to inflate the modules of the inflatable range such as beams (Ref. 8095 or 8096) or mats (Ref. 8077). Easy to use, it has two modes of inflating: Single or dual action. Maximum pressure can be reached thanks to the rapid pumping at the beginning and then slower towards the end for the perfect balance.
Equipped with handles and ergonomic footrest.
The pressure gauge "Manometer" is integrated into the shaft.
Delivered with a set of seals.
Equipped with handles and ergonomic footrest.
The pressure gauge "Manometer" is integrated into the shaft.
Delivered with a set of seals.
Only by quotation
Technical features
- Dimensions: 60 x 0,75 cm (h x Ø)
- Weight: 2,20 kg
- Capacity: 2 x 2000 cm3
- Maximal pressure: 2 bar (29 PSI)
- Integrated manometer
- Passage between the two inflating modes by a pivoting handle
- Shaft in aluminum
- Extra-resistant inflating pipe
- Delivered with pipe with bayonet pipe for the grey valves
- Weight: 2,20 kg
- Capacity: 2 x 2000 cm3
- Maximal pressure: 2 bar (29 PSI)
- Integrated manometer
- Passage between the two inflating modes by a pivoting handle
- Shaft in aluminum
- Extra-resistant inflating pipe
- Delivered with pipe with bayonet pipe for the grey valves
5
year
Ref : 8011
MANUAL INFLATOR FOR INFLATABLE MODULES, MATS AND BEAMS
Ref : 8012
ELECTRICAL INFLATOR FOR INFLATABLE MODULES, MATS, BEAMS AND TRACKS - VOLTAGE REQUIRED: 230 VOLTS - 50 HZ
Only by quotation
Ref : 8062
3D PUSH-OFF SQUARE INFLATABLE MODULE - SPECIFIC VAULTING - 95 x 95 x 20 cm
Only by quotation
Ref : 8071
3D PUSH-OFF RECTANGULAR INFLATABLE MODULE - SPECIFIC VAULTING - 110 x 60 x 10 cm
Only by quotation
Ref : 8065
3D PUSH-OFF SQUARE INFLATABLE MODULE - SPECIFIC VAULTING - 95 x 95 x 10 cm
Only by quotation
