Gymnova
O’Jump
Educ’Gym
Eurotramp
Brick
.png)
.png)
_1.png)
Ref : 8016
ELECTRICAL INFLATOR FOR INFLATABLE LANDING BLOCKS - VOLTAGE REQUIRED: 230 VOLTS - 50 HZ
This electric inflator is ideal for mobile inflatable landing blocks. The voltage required is 230 V - 50 Hz (EU plug). It can be used to inflate small (Ref. 8040), medium (Ref. 8041) and large (Ref. 8042) landing blocks.
The inflator is fitted with non-slip rubber feet to keep it stable while in operation and ensure a safe training session.
In addition, it comes with a carrying handle and a storage pocket for the power cord for quick and easy installation and removal.
The inflator is fitted with non-slip rubber feet to keep it stable while in operation and ensure a safe training session.
In addition, it comes with a carrying handle and a storage pocket for the power cord for quick and easy installation and removal.
Only by quotation
Technical features
- Voltage / Cycle required: 230 V - 50 Hz
- Dimensions (L x w x H): 48 x 46 x 50 cm (19’’ x 18’’ x 19,5’’)
- Net/ gross weight: 18/20 kg (39/43 lb.)
- Power cord length: 7.6m (25’’)
- Stand height: 10 cm (4.5’’)
- Power: 1CV - 735 W
- Maximum air flow: 90000 l/min (3180 CFM)
- Maximum static pressure: 7 mbar (2.8’’)
- 3 Wheel speeds: L 1070 / M 1190 / H 1400 tr/min (RPM)
- 3 Amperages: L 4.7 / M 5.2 / H 5.8 A
- Inflation Engine: Grizzly 1 HP
- Dimensions (L x w x H): 48 x 46 x 50 cm (19’’ x 18’’ x 19,5’’)
- Net/ gross weight: 18/20 kg (39/43 lb.)
- Power cord length: 7.6m (25’’)
- Stand height: 10 cm (4.5’’)
- Power: 1CV - 735 W
- Maximum air flow: 90000 l/min (3180 CFM)
- Maximum static pressure: 7 mbar (2.8’’)
- 3 Wheel speeds: L 1070 / M 1190 / H 1400 tr/min (RPM)
- 3 Amperages: L 4.7 / M 5.2 / H 5.8 A
- Inflation Engine: Grizzly 1 HP
1
year
Ref : 8016
ELECTRICAL INFLATOR FOR INFLATABLE LANDING BLOCKS - VOLTAGE REQUIRED: 230 VOLTS - 50 HZ
